C-Slim AlloyPro DH 1000x1000mm Outdoor LED Display

Each cabinet covers exactly one square meter, so a twenty-square-meter wall works out to twenty cabinets, and budget planning follows directly from screen area. Rows align on one-meter grids from the first cabinet to the last. Where wall height calls for it, the P2.97 model uses a 1000 × 500 mm half-meter format on the same platform.

The extruded aluminum housing adopts contact heat conduction with thermal silicone gel, pulling module heat away at the source through the aluminum base shell. Rated operation spans minus 20 °C to 50 °C, so winter cold and summer peaks sit inside the design range. Stable thermal conditions support long daily operating hours.

Long operating hours make power draw a real cost item. Common-cathode modules run at 180 W per square meter on average, a 35% efficiency gain over conventional screens. Peak load sits at 550 W against 750 W under common-anode drive, and the saving repeats across every operating hour.

The pitch range runs from P2.97 for panels near pedestrians to P10.42 for long-view roadsides, all on one aluminum profile platform. Lamps step from SMD1415 at close view to SMD2727 at long view, with white-balance brightness between 4,500 and 6,000 nits. Module upgrades later in the screen's life keep the original frame.

Front and rear IP65 sealing keeps dust and driving rain outside the cabinet. The aluminum profile structure resists corrosion through years of outdoor exposure. The sealed design suits billboards, building-front screens and other open-air installs.